Spray Height Calculator

« Go Back

THEORETICAL Spray Height, Pattern Width, and Spray Angle Calculator

Instructions:

  • Enter two known operating conditions to determine the third
  • If the height or swath entered is in US measures, the output will be in US measures.
  • If the height or swath entered is in metric units, the output will be in metric units.
       
Option 1 Desired Height Spray Angle Resulting Swath
  degrees
 
Option 2 Desired Swath Spray Angle Required Height
  degrees
 
Option 3 Desired Swath Desired Height Required Spray Angle
  degrees

Tip*

Desired swath is typically 2 x the width of the nozzle spacing. This generates a 100% overlap and a very uniform distribution with fan style nozzles. With 100% overlap, the edge of the spray will be at the center of the adjacent nozzle.